How much could there be to know about damage contractors and their work? Well, allow us to give you a hint: a lot more than you probably realize. We can describe what these contractors do in about one sentence. They repair items and home materials that have been damaged, often by things like fires and floods. This sentence tells you a lot, but it does not tell you everything. That's why we really recommend reading this blog. There's so much more to know about damage contractors, and the articles here will open up your world in that regard. Learn about their work, their challenges, and the way the industry works, in general.
No one wants to come home to a lake inside their house because a pipe has burst and water is running out of the pipe. If that is what you have just come home to or woken up to, then you need to know what to do. Knowing how to handle the flood is going to let you mitigate the damage that you may incur from the water pouring down from your pipes. So, what should you do?
Find the Source
If it isn't a really obvious source, then you need to figure out where the water is coming from. If it has been flooding for a while, then it may have damaged the wall or ceiling so that you can see the damaged pipe. Otherwise, you are going to have to go looking to see if you can at least pinpoint the area the source is located in. You need to know the source for a couple of reasons. One is so that you can tell the plumber and water restoration company where the water was coming from so that they can get right to work on the repairs.
Turn off the Water
You want to make sure that no more water is coming into your house. The best way to do that is to cut the water supply. Depending on where the water is, you may have to turn off the supply to the entire house. You may be able to do that in your basement, but you may have to go outside to where the water line enters your property to turn off the water. You should find out where to turn the water off before you have a flood so that you can handle that immediately.
Turn off Your Power
You should also turn off your power. Electricity and water are not friends, and if you turn off the power, you may be able to avoid some of the damage that could happen to your wiring and to your appliances. You may want to turn it off at the meter, depending on where the water is and how much water there is. If you can get to your circuit breaker easily, then you can just flip the switch that will cut power to your whole house.
If you have a lot of water in your house, there are things that you need to do immediately so that you can mitigate the damage. Then you need to call your homeowner's insurance and a water damage restoration company such as HIGH TOUCH RESTORATION to get the water out of your house.
Share